6. Rotary screen printing
The printing mold is a cylindrical nickel-skin screen with a hollow pattern, which is installed in a certain order above the circulating rubber guide belt and can rotate synchronously with the guide belt. When printing, the color paste is input into the net and stored at the bottom of the net. When the rotary net rotates with the guide belt, the scraper pressed against the bottom of the net and the flower net are relatively scraped, and the color paste reaches the surface of the fabric through the patterns on the net. Rotary screen printing is a continuous process, high production efficiency, and has the advantages of roller and flat screen printing, but there are certain limitations in the fineness of the pattern and the richness of the printing color. Remember: rotary screen printing has certain limitations in the choice of color and luster.
7. Pigment printing
It is also called pigment printing. Because the pigment is a water-insoluble coloring substance and has no affinity for fibers, its coloring must be achieved by coating with a film-forming polymer compound (adhesive) and adhesion to the fiber. Pigment printing can be used in the processing of any fiber textiles, and it has advantages in the printing of blended and interwoven fabrics. The process is simple, the color spectrum is wider, the flower shape is clear, but the hand feel is not good, and the rubbing fastness is not high.
8. Water slurry printing
The so-called water slurry is a kind of water-based slurry, which is not strong when printed on clothes, and the covering power is not strong. It is only suitable for printing on light-colored fabrics. The price is relatively low. It is a lower-grade printing type. But it also has an advantage, because it will not affect the original texture of the fabric, so it is more suitable for large-area printing patterns. Features soft hand feeling and bright color. But water slurry has a major drawback. The color of the water slurry is lighter than the cloth color~~ If the color of the cloth is darker, the water slurry will not cover it at all.
9. Glue printing
The emergence of glue and its wide application in water slurry, because of its very good coverage, it can also print any light color on dark clothes, and it has a certain gloss and three-dimensional effect, making the garment look more high-end So it is quickly popularized, and it is used in almost every printed T. But because it has a certain hardness, it is not suitable for large-area solid patterns. It is best to print large-area patterns with water paste, and then dotted with some glue, which can solve the problem of large-area glue hard and highlight the pattern. There is also a way to steal a large area of ​​solid patterns to make a bad effect, but it is always a bit hard to wear, so it is better to combine water and glue to solve the problem of large-area printing. . There are glossy and matte surfaces, soft, thin, environmentally friendly and can be stretched. Generally speaking, glue printing is more commonly used, like leisure brands such as "Yi Chun" basically use glue. Forget to remind you that both glue printing and water-based printing can be washed with water. Comparing the prices of these two, glue is still more affordable than water slurry.
10. Ink printing
At first glance, the ink is not very different from the glue, but when the glue is printed on smooth fabrics such as windbreaker materials, the color fastness is generally very poor, and it can be scraped off with nails, but the ink can overcome this shortcoming. Therefore, when making a windbreaker, it is usually printed with ink, which is characterized by bright color and vivid image. There has been a wave of human head prints in the market some time ago~~ I don’t know if you are paying attention, so clear and super-realistic printing generally only ink printing can print that effect~ Sometimes you can also sprinkle gold powder and silver powder on the ink. Kind, I feel that the decorative effect is better~ The price of ink printing is not very clear, but the price of printing generally depends on the number of colors used. There are more colors for ink printing, and the price should be relatively cheap. Bar.
11. Thick slab slurry
Thick slab paste is based on glue. It is like glue printed on multiple layers repeatedly. It can achieve a very neat three-dimensional effect. Generally speaking, the process requirements are relatively high, and it is generally suitable for sports and leisure. For styles, the patterns generally use numbers, letters, geometric patterns, lines, etc., and the lines should not be too small. Some people have a unique style to print floral patterns, which can be seen on leather materials or thicker fabrics in autumn and winter clothing.